Randalls Forestry Equipment Co. Pty Ltd

(+61) 03 9369 8988

Ponsse Beaver

PONSSE Beaver is based on simple and robust solutions, many of which are familiar from PONSSE harvesters in larger size categories. The most powerful hydraulic capacity in its size category, reliable Ponsse cranes and efficient harvester heads make up for an entity that is not shadowed even by its larger counterparts.

Beaver’s chassis structure is based on a short wheelbase and free-floating portal axle. Combined, they result in an agile all-terrain solution for the demanding conditions of first thinnings. Thanks to the extendable crane, a low centre of gravity and long reach, Beaver is stable in all conditions.

Beaver is available with a PONSSE C44+ parallel crane or PONSSE C2 sliding boom crane, depending on the conditions and what the operators are used to. The available harvester heads are PONSSE H5 and H6.

 

Technical details - PONSSE Beaver

Dimensions

Minimum weight
14 900 kg (32 849 lbs)
Typical weight
17 100 kg (37 699 lbs)
Length
7 070 mm (278 in)
Width
2 650 - 2 930 mm (104.3-115.4 in)
Ground clearance
640 mm (25 in)
Transportation height
3 570 mm (140.6 in)

Crane C2

Slewing torque (gross)
38 kNm
Crane tilt angle
-12°/+18°
Crane turning angle
250°
Lifting moment (gross)
205 kNm
Reach
10 m

Crane C44+

Slewing torque (gross)
PONSSE Beaver 40 kNm, PONSSE Fox 52 kNm, PONSSE Ergo 43 or 57 kNm
Crane tilt angle
PONSSE Fox ±15°, PONSSE Beaver -12 °/+18°, PONSSE Ergo -12 °/+18° or +18°
Crane turning angle
250°
Lifting moment (gross)
PONSSE Beaver and Fox 230 kNm, PONSSE Ergo 250 kNm
Reach
PONSSE Fox: 32.8-36 ft (10-11 m) (H5, H6), PONSSE Beaver: 32.8-36 ft (10-11 m) (H5, H6), PONSSE Ergo: 32.8-36 ft (10-11 m) (H5, H6, H7)

Engine

Model
MB OM904 LA EU Stage IIIA
Power
129 kW (175 hp)
Torque
675 Nm /1 200-1 600 rpm
Tractive force
130 kN (29 224 lbf)
Fuel tank volume
330 l (75.6 gal UK)

Hydraulic System

Control system
PONSSE OptiControl
Hydraulic circuits
Separate hydraulics circuits for the harvester head and crane
Working pump
190 cm3 (11.6 cu in)
Oil tank volume
200 l (44 gal UK)

Tyres

Front
600/55-26.5“ or 710/45-26.5”
Rear
600/55-26.5'' or 710/45-26.5''

Harvester Head H5

Weight from (depending on the equipment)
from 1 984 lbs excl. rotator (900 kg excl. rotator)
Feed system
3 feed rollers
Feed force
4,271 lbf (19 kN)
Maximum opening
20.8 in (530 mm)
Feeding speed
20 ft/s (6 m/s)

Harvester Head H6

Weight from (depending on the equipment)
from 2,315 lbs excl. rotator (1,050 kg excl. rotator)
Feed system
3 feed rollers
Feed force
5,620 lbf (25 kN)
Maximum opening
23.6 in (600 mm)
Feeding speed
20 ft/s (6 m/s)

Brochure

Download